Lcd-Display - CARE FITNESS 55505 Bedienungsanleitung

GB
KEY GUIDE
MODE:
on the main screen. TIME-SPEED-DIST-CAL-PULSE-SCAN-TIME-........
TIME-DIST-CAL-T.H.R-
RECOVERY: 1.Press the button going to pulse recovery detecting.
BODYFAT: Press the button go into measure your body fat. Before operating this function you have
UP
DOWN/ (RESET): 1. Decrease the setting value one step by press the button one time.
BATTERY REPLACEMENT
1. Please install 2 pieces of AA or UM-3 batteries in the battery case on the back of monitor.
2. Ensure that the batteries are correctly fitted. Battery must be correctly positioned and make sure
the battery spring is properly contacted with battery.
3. If the display appears blank or display only partial segment, remove the batteries and wait 15
seconds, then replace.
4. Whenever remove batteries, all the functions values will be reset to zero.
Downloaded from www.Manualslib.com
LCD DISPLAY
1.When you are exercising press the button of MODE to select function to be preset
2.When you stop exercising press the button of MODE to select function to enter setting
mode.
3. Hold over 3 seconds the display and function will save and turn off the screen.
to enter your personal data in monitor step by step.
: 1. Increase the setting value one step by press the button once.
2. Hold the button over 3 seconds increasing the setting value six steps per second.
2. Hold the button over 3 seconds decreasing the setting value six steps per second.
3. When you are exercising press and hold the button over 3 seconds reset all of the
values to zero.
manuals search engine