Denon Professional DN-500BD MKII Benutzerhandbuch Seite 9

Initial Wizard
1. Press DN-500BD MKII's Power button to power it on. Make sure your TV is on, too.
2. The Initial Wizard screen will appear. On each page of the Initial Wizard:
• Use the up/down cursor buttons () on the remote control to move through the available options.
• Press OK to confirm your selection and move to the next page.
• Press Skip Back (
3. On Page 1, press OK on the remote control to move to the next screen.
4. On Page 2, select the language you want the display to use.
5. On Page 3, select the broadcasting standard for your location: NTSC, PAL, or Multi. Select Multi only
if your TV supports both NTSC and PAL systems.
6. On Page 4, select your TV's resolution. Once you press OK, the resolution will change temporarily. At
that point, select Yes or No to confirm that you want to use that resolution. If you do not do this within
12 seconds, the resolution will return to the previous setting.
7. On Page 5, select your TV's aspect ratio. Once you press OK, the aspect ratio will change and you
continue to Page 5. If you do not want to use that aspect ratio, press Skip Back (
previous page and select a different one.
8. On Page 6, press OK to view the Home screen and start using DN-500BD MKII, or press Skip Back
( ) to return to the previous page.
) to return to the previous page.
) to return to the
9