Denon Professional DN-500BD MKII Benutzerhandbuch Seite 146

Audio
Analog Outputs
Digital Output
Surround Audio
Frequency Response
Signal-to-Noise Ratio
Total Harmonic Distortion
Dynamic Range
Headroom
Channel Separation
Communication
Remote Control
Serial Remote
Ethernet
Other / General
Connections
Power
Environmental Conditions
Dimensions
(width x depth x height, with rack ears)
Weight
(with rack ears)
146
Output Level
(balanced XLR)
Output Level
(unbalanced RCA)
Output Level
(coaxial)
Signal Format: AES/EBU
DTS-Master Audio, DTS-HD High Resolution Audio,
DTS Digital Surround, Dolby TrueHD, Dolby Digital (AC-3),
Dolby Digital Plus (7.1ch)
20 Hz – 20 kHz (+0.5 dB)
> 100 dB
(A-weighted)
< 0.05%
> 100 dB
(A-weighted)
6 dB
> 90 dB
Infrared protocol, > 200 mV transmission output level
Connector: 9-pin D-Sub female, RS-232C
Mode: Full duplex
Baud Rate: 9600, 38400, or 115200 bps
Connector: LAN port
Standards: Ethernet
(10 Mbps)
(2) XLR audio outputs
(2) RCA audio outputs
(8) RCA audio outputs
(1) Coaxial digital audio output
(1) HDMI audio/visual output
(1) LAN port
(1) 9-pin D-Sub female RS-232C port
(1) IEC power connection
Connection: IEC
Requirement: 100–240 VAC, 50/60 Hz
Consumption: 15 W typical, < 0.5 W standby
Operating temperature: 41 – 95 °F (5 – 35 °C)
Operating humidity: 25 – 85%, no condensation
19.00" x 10.75" x 1.73"
483 mm x 273 mm x 44 mm
5.9 lbs.
2.7 kg
: +4 dBu = +1.786 dBV
: +6 dBV
: 0.5V, 75 Ω
(selectable)
, Fast Ethernet
(L/R, balanced)
(L/R, unbalanced)
(7.1 surround sound)
(100 Mbps)