Denon Professional DN-500BD MKII Benutzerhandbuch Seite 28

Device Setup
•
Firmware
o Version: DN-500BD MKII's current firmware version.
o Upgrade: When you are upgrading DN-500BD MKII's firmware, select how DN-500BD MKII
will access the firmware file: Disc, USB Storage, or Network. Follow the instructions
included with the firmware update file.
•
Setting
o Remote Control Code: If you are using other similar Denon Professional products that
unintentionally respond to DN-500BD MKII's remote control, select a different remote
control code to keep its communication separate: Code 1, Code 2, or Code 3.
o HDMI CEC: When set to On, DN-500BD MKII's remote control can send commands to DN-
500BD MKII as well as a TV connected to the HDMI output (your TV must support HDMI
CEC). When set to Off, DN-500BD MKII's remote control will send commands to DN-
500BD MKII only.
o Setup Management: Select Export to save all of DN-500BD MKII's current settings as a
.bin file on a connected USB drive. Select Import to import a previously saved .bin file of
DN-500BD MKII's settings from a connected USB drive.
o Reset Factory Defaults: Select OK to erase all of DN-500BD MKII's current settings and
restore its original/default settings, or select Cancel to keep the current settings. If you
select OK, you will see the Initial Wizard screen (as you did when you first set up DN-500BD
MKII).
o Serial Bit Rate: Select the serial bit rate: 9600, 38400, or 115200.
Options
The Options menu lets you change certain settings during playback without having to enter the Setting
menu. The menu will appear on the left side of the screen. The available Options will vary based on the
kind of media you are currently using: DVD or Blu-ray Disc (see
Video Options below), audio CD (see
below), or picture (see
To show/hide the Options menu, press Option on the remote control. Alternatively, press Return to
close the Options menu.
In the Options menu:
•
To move through a list, use the up/down cursor buttons (). The current item is outlined in
blue.
•
If there is an arrow to the right of an item (), you can press the OK or the right cursor button ()
to open a submenu with additional options.
•
In a submenu, if there are arrows above or below it (), you can use the up/down cursor
buttons () to select the previous/next option. Press OK or the left cursor button () to
confirm your choice and close the submenu.
•
If there is not an arrow to the right side of an item, you can press OK to cycle through the available
options or to execute the command.
28
Audio CD Options
Picture File Options
below), audio file (see
below).
BDMV Options below), video file (see
Audio File Options