Technical Specifications; Preparing For Use - Nature7 BEAM 569610 Bersetzung Der Ursprünglichen Bedienungsanleitung

II. Technical specifications
Model number
Nature7® 569610
Water capacity
80 ml
Mist generation
~ 20 ml/h
Power voltage, current, input power
24 V/0.37 A DC, 8.88 W
Dimensions
Ø 11.4 × 15.0 cm
Weight
260 g
GB
30
Description of parts (fig. 1)
1. Diffuser outlet
2. Cover
3. Maximum water level mark
4. Water pour out groove
5. Mist generator
6. Water tank
7. Vent
8. Generate mist button
9. Lamp button
10. Direct-current voltage connector
11. Power adapter
III. Preparing for use
IMPORTANT INFORMATION PRIOR TO USE:
Place the aroma diffuser on a firm even
surface.
Always use fresh clean drinking water in
the appliance. We recommend leaving tap
water to stand for a while to evaporate
the chlorine. The water that is used
should not be too hard.
S TE P 1
Remove the cover (fig 2).
S TE P 2
Fill up the water tank with water up to
the water mark. (fig. 3).
MAKE SURE THAT THE WATER LEVEL
DOES NOT EXCEED THE MAXIMUM
WATER LEVEL MARK
S TE P 3
Apply 2-3 drops of your favourite
essential oil into the water. Do not add
the essential oil when using the appliance
only for humidification. (fig. 4).
S TE P 4
Put on the cover (fig. 5).
S TE P 5
Connect the adapter (fig. 6, 7) and press
the Mist button to generate mist and, if
desired, also the Light button to turn on
the light. (fig. 8).
•
WARNING
Do not move, tilt the appliance or
refill or pour water out of it while it
is in operation (fig. 9).
GB
31