Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4
46
man_LK2100 TOUCH ('20) V4.indd 46
man_LK2100 TOUCH ('20) V4.indd 46
BRIEF INSTRUCTION OF FUNCTIONS
1.
Refrigeration and cooling: An evaporator conforming to international envi-
ronmental protection standards is adopted with advanced cooling technology
of humidity and evaporation by medium- water,which evaporates quickly to
cool the air passing through the evaporator in a short time. In hot and arid
regions, the temperature drop in the wind zone is up to 6~12°C. Even in the
humid regions, the temperature drop in the wind zone is still up to 3~5°C.
2.
Filtering: This unit can filter out the harmful tiny substances such as dust,
fibers, smoke, and etc. from the air output. Filtered clean air will bring you to
a feeling in neighborhood to a forest or seaside.
3.
Damping: This unit has obvious effect of damping in a dry area or season. This
function can keep the indoor space in necessary humidify, therefore help you
keep your skin under good condition and lower the possibility of diseases.
4.
Selection of Air Flows: 8 speeds of air flow are provided on the unit to meet
your need.
5.
Selection of Air Types: Three types of air flow can be selected to meet your
need. The types to be selected are: standard, natural wind and sleep mode.
6.
Selection of Directions of Air Flows: This unit can blow under automatic swing
in range of continuous 120 degrees.
FUNCTIONS OF ALL BUTTONS
6
1.
POWER: Press the power button to turn the cooler on, the horizontal louvers
will open and the unit starts to operate at speed 5 after four seconds, 05 will
be shown on the display and the "S" indicator lights up.
Note: Speed and temperature will be displayed on screen by turn every 5
seconds, the corresponding indicator lights up, the lighting belt will also light
up and then go out after 30 seconds if the user makes no operation. The light-
ing belt will light up again if the user presses any button.
2.
SPEED: Press the „Speed +" button to accelerate the fan speed or press the
„Speed -" button to lower the fan speed. Pressing the button will change
the fan speed to one higher or lower level, the corresponding speed will be
displayed on the display.
3.
WIND TYPE: Press the mode button to choose standard, natural wind or sleep
mode.
A: Standard wind is normal wind for each speed.
B: Natural wind means the speed will change automatically from speed 2 to 7.
C: Sleep mode: The speed will be lowered in sequence from speed 8 to 1 every
3
9
2
1
4
7
2
5
07-08-20 09:25
07-08-20 09:25
Werbung
Inhaltsverzeichnis
