Audio Mode; Vox Mode - Philips Avent SCD831 Bedienungsanleitung

14
English
AUDIO
1
AUDIO 20°C
1
AUDIO 20°C
VOX
1
AUDIO 20°C

AUDIO mode

1 Press the mode button on the side of the parent unit to switch to AUDIO
mode.
When the AUDIO mode is activated, the display of the parent unit
switches off. After 3 seconds the display will completely turn off and the
status bar will disappear.
Note: The status bar is not visible when the display is off.
Note: The link light shows that the parent unit is still on and connected to
the baby unit.
Note: Set the sensitivity level to 'very high' to have continuous sound
on the parent unit. Please see the Sensitivity level chapter for more
information.
All sounds are constantly transmitted to the parent unit. If your baby
cries, the display of the parent unit is still off, but the sounds detected by
the baby unit are transmitted to the parent unit.

VOX mode

1 Press the mode button on the side of the parent unit to switch to VOX
mode.
Note: When the display is on, the selected mode is shown in the status
bar. The status bar is not visible when the display is off.
When the VOX mode is activated, the display and sound of the parent
unit switch off, if there is no sound detected for 20 seconds.