conditioning (chromate, wood preservative). Material containing asbestos
must only be treated by specialists.
•
Where the use of a dust extraction device is possible it shall be
used.
•
To achieve a high level of dust collection, use industrial vacuum
cleaner DSS 35 M iP for wood and/or minerals together with this
tool.
•
The work place must be well ventilated.
•
The use of a dust mask of filter class P2 is recommended.
According to the general supply conditions for business dealings, suppliers
have to provide to companies a warranty period of 12 months for redhibitory
defects. (To be documented by invoice or delivery note).
Damage due to natural wear, overstressing or improper handling are
excluded from this warranty.
Damages due to material defects or production faults shall be eliminated
free of charge by either repair or replacement.
Complaints will be accepted only if the tool was returned in non-dismantled
condition to the manufacturer or an authorized Eibenstock service centre.
Declaration of Conformity
We declare under our sole responsibility that the product described under
"Technical Data" is in conformity with all relevant provisions of the directives
2011/65/EU, 2014/30/EU, 2006/42/EC
including their amendments and complies with the following standards:
EN 60745‚ EN 50581.
Technical file (2006/42/EC) at:
Elektrowerkzeuge GmbH Eibenstock
Auersbergstraße 10
D – 08309 Eibenstock
Lothar Lässig
General Manager
24.08.2020
Subject to change without notice.
Warranty
Frank Markert
Head of Engineering
20