Princess 01.182080.01.001 Bedienungsanleitung Seite 7

• Fill the water tank with water. Make sure to properly secure the
stopper. Place the water tank back into the device.
• Select the steam mode button. The temperature will be set
automatically to 100°C.
• When the products is in steam mode, you cannot adjust the
temperature.
• Place your ingredients into the baking pan.
• Place the baking pan on top of the aero plate and close the
device.
• Press the manual button to manually set your cooking time. Set
the amount of time you want to steam your ingredients by using
the time control buttons.
• Press the power button to start the program.
• You can use the steam mode to steam various types of food.
• To add an extra shot of steam, press the steam shot button.
Water injection
• When during steaming the water tank runs empty, this indicator
light will start to flash and an alarm will go off.
• You can refill the water tank and put it back into place. The light
will stop flashing and the alarm will stop.
• If the water tank is short of water for more than 2 minutes, the
device will automatically stop working.
Air fry mode
• Place ingredients into the baking pan.
• Press the Air fry mode button.
• Press the manual button to manually set the desired temperature
and time by using the control buttons.
• You can also set on of the preprogrammed modes. See
'Aerofryer programs' to select the right program.
• Press the power button to activate the program.
• When you hear the timer beep, the set preparation time has
elapsed. The device will shut off after 20 seconds. Pull the pan
out of the appliance and place it on a heat-resistant surface.
• During the hot air frying process, the heating-up light will blink
during heating, when the set temperature is reached the heating-
up light will stay on continuously. When the temperature drops
below the set temperature the heating-up light will start blinking
again to maintain the set temperature.
Instruction manual
EN
7