Operation - Fulbat FULBOOST Bedienungsanleitung

Indicators
Lights
Internal battery capacity
for the device
Indicators flash in turn, whilst charging the device. The number of indicators ON indicates the capacity of the
NOMAD POWER internal battery. All lights are steady if the battery is on hold or the charge is complete.
RECHARGE THE NOMAD POWER before first use and after each use.
Press the power button
1 flashing
0%
INTERNAL BATTERY CHARGING
1. Connect mains adaptor to domestic mains.
2. Connect the other end to the NOMAD POWER 14V/1A to start the charge.
OR
1. Connect car adaptor to the car cigarette lighter socket.
2. Connect the other end to the NOMAD POWER 14V/1A to start the charge.
CHARGING MOBILE PHONES
1. Connect the cable to the NOMAD POWER USB port 5V 4A
2. Select the appropriate adaptor for your mobile phone or tablet and plug it in.
3. The NOMAD POWER starts the charge automatically.

OPERATION

to check internal battery level of the NOMAD POWER.
1 steady 2 steady
25% 50%
4
3 steady 4 steady
75% 100%
.