Advanced Setting - Asus MU201G Benutzerhandbuch

Advanced Setting

Category
Angle Snapping*
Lift Height**
Scroll Setting
USB Polling Rate
Double Click
Snap Switch
* Angle Snapping brings smooth and straight mouse movements. By default, Angle
Snapping is disabled.
** The tracking function stops when you lift the mouse off the mouse pad or surface
higher than your selected Lift Height. If you encounter irregular mouse movements
when you are using your mouse on your mouse pad or surface, try selecting a level
higher than your selected Lift Height.
Items
Click to add a new Macro Console.
Click to duplicate the existing Macro Console.
Click to delete the Macro Console.
Export
Click to save the current macro to your hard disk drive.
Import Click to load a macro from your hard disk drive.
OK
Click to apply the changes.
Cancel Click to exit the Macro Management.
* When a Macro function is not assigned to a mouse button, the Macro function
and its name are stored in your computer. If you assign the Macro function to your
mouse button and connect the mouse to anther computer , the assigned Macro
name changes automatically but does not affect the original Macro function.
Items
ON
Select to enable the Angle Snapping.
OFF
Select to disable the Angle Snapping.
High
Select to adjust the Lift Height.
Low
1-100
Choose the number of lines per scroll.
1000Hz
Select to change the Polling Rate.
500Hz
250Hz
125Hz
1-10 Choose the stage of Double Click.
50 ~ 7200 dpi
Specifies the DPI value when the snap switch button
is activated.
Descriptions
Descriptions
17