VISIOMED TensioFlash KD-795 Gebrauchsanleitung Seite 46

5240
5500 5100-5800
5785
90 Visiomed - KD-795 - Manuel d'utilisation - 022019
Pulse modulation 217Hz, 9V/m
Table 4
For ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING
Recommended separation distances between
portable and mobile RF communications equipment and the KD-795
The KD-795 is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of th
help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (tran
the KD-795 as recommended below, according to the maximum output power of the communications equipment.
Rated maximum
output
of transmitter W
150 kHz
to 80 MHz
d = 1.2
0.01 0.12
0.1 0.38
1 1.2
10 3.8
100 12
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be determined using the equation
the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) accor-ding to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people.
Separation distance according to
frequency of transmitter m
80 MHz 800 MHz
to 800 MHz to 2,5 GHz
d = 1.2 d = 2.3
0.12 0.23
0.38 0.73
1.2 2.3
3.8 7.3
12 23