Werbung
1. Introduction
Dear customer. We have written this manual with the objective to optimize the use of
our lifting tower T-116. We ask you to read these directions attentively before using the
tower.
All our products have been submitted to the most exigent tests and controls during the
process of fabrication.
For the certifications contained in the present manual to take effect, only original spare
parts must be used in all repair works.
The reference number and the year of construction or the serial number must be
indicated for any consultation on the product.
2. Technical specifications
Lifting telescopic tower model T-116. This tower is designed to lift loads such as supports
for structures and illumination gadgetry in a vertical sense to different heights.
2.1.- Max. load: 150 kg
2.2.- Min. load: 25 kg
2.3.- Max. height: 5,50 m
2.4.- Min. height: 1,70 m
Min. height for the load: 0,20 m
2.5.- Base area: 1,70 x 1,60 m
2.6.- Folded base area: 0,42 x 0,42 m
2.7.- Weight: 85 kg
2.8.- Winch: 900 kg. Maximum load with automatic stop load brake. Certified in
Düsseldorf according to DIN 15020 and VBG 8 with the number GS03015.
2.9.- Cable: Steel DIN 3060. Tensile strength 180 kg/mm2. Twisting-resistant. 5 mm cable
diametre.
2.10.- Construction material: Principal body aluminium profiles 6082-T6. Base and legs
steel profiles EN 10305.
2.11.- Four-profile sliding system on nilatron rollers operated by steel cable driven by
grooved pulleys with ball-bearing pads.
2.12.- Adjustable stabilizer plates in the legs with nonslip rubber supports.
2.13.- Leg anchorage by safety triggers (R).
2.14.- Internal safety system against cable breakage.
2.15.- Bubble level for vertical alignment of the tower.
2.16.- Antirust protection and electroplated zinc or black finish.
Werbung
