DeLOCK 90280 Bedienungsanleitung Seite 9

English
Switch-off Setting
User-defined switch-off
The default switch-off is 3 minutes and 0 seconds.
.B030$
.B029$
Follow below steps, to set a switch-off after for example 5 minutes and 30 seconds.
1. Scan [Set Minute]
2. Scan [0] & [5] on page 3.
3.
Scan [Set Minute]
4. Scan [Set Second]
5. Scan [3] & [0] on page 3.
6.
Scan [Set Second]
Deactivate switch-off
Scan [DISABLE TIMEOUT]
.B021$
Smartphone connection
Follow the instruction Establish a Bluetooth connection - [BT mode - HID]. You can skip number 5, as iOS and Android do
not need a pin.
Support Delock
If you have further questions, please contact our customer support support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without notice in advance. Errors and misprints
excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose, regardless in which way or by any
means, electronically or mechanically, without explicit written approval of Delock.
Edition: 07/2020
SET MINUTE
(Range: 00 ~ 60)
SET SECOND
(Range: 00 ~ 60)
DISABLE TIMEOUT
-9-