Herunterladen Diese Seite drucken
Vorschau ausblenden Andere Handbücher für 90518:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Declaration of conformity
Products with a CE symbol fulfill the EMC directive (2014/30/EU) and
RoHS directive (2011/65/EU+2015/863+2017/2102), which were released by the
EU-comission.
The declaration of conformity can be downloaded here:
https://www.delock.de/produkte/G_90518/merkmale.html
Frequency band(s): 2400 - 2483.5 MHz
Maximum radio-frequency power transmitted: 0.773 mW EIRP
WEEE-notice
The WEEE (Waste Electrical and Electronic Equipment)-directive, which became
effective as European law on February 13th 2003, resulted in an all out change
in the disposal of disused electro devices. The primarily purpose of this directive
is the avoidance of electrical waste (WEEE) and at the same time the support of
recycling and other forms of recycling in order to reduce waste. The WEEE-logo on
the device and the package indicates that the device should not be disposed in the
normal household garbage. You are responsible for taking the disused electrical
and electronical devices to a respective collecting point. A separated collection and
reasonable recycling of your electrical waste helps handling the natural resources
more economical. Furthermore recycling of electrical waste is a contribution to
keep the environment and thus also the health of men. Further information about
disposal of electrical and electronical waste, recycling and the collection points
are available in local organizations, waste management enterprises, in specialized
trade and the producer of the device.
Battery guideline (2006/66/EC)
The built in battery is recyclable. Please dispose of it by using the battery container
or dealer. Just dispose of the empty battery to gurantee the environmental
protection.
EU Import: Tragant Handels- und Beteiligungs GmbH
Beeskowdamm 13/15, 14167 Berlin, Germany
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without notice
in advance. Errors and misprints excepted.
Copyright
No part of this user's manual may be reproduced, or transmitted for any purpose,
regardless in which way or by which means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 01/2022
User manual
Bedienungsanleitung
Barcode Scanner 1D and 2D with stand
2.4 GHz
Product-No:90518
User manual no:90518-a
www.delock.com

Werbung

loading

Inhaltszusammenfassung für DeLOCK 90518

  • Seite 1 Support Delock If you have further questions, please contact our customer support support@delock.de You can find current product information on our homepage: www.delock.com Final clause Information and data contained in this manual are subject to change without notice in advance. Errors and misprints excepted.
  • Seite 2: Specification

    Description Kurzbeschreibung This barcode scanner by Delock can be wirelessly connected to a PC or laptop. Dieser Barcode Scanner von Delock kann mit einem PC oder Notebook kabellos All common 1D and 2D barcode types can be precisely captured even at long verbunden werden.
  • Seite 3 English Change language settings You can choose between below languages. Safety instructions • Protect the product against moisture • Protect the product against direct sunlight German • Do not look directly into the LED diode of the scanner Charge battery You can charge the scanner's battery by using the charging station.
  • Seite 4 Terminator setting Prefix The prefix is a string of character strings defined by the user before the decoded data. You can add and modify the prefix by reading the following setting codes. The prefix allows up to 15 characters. For each prefix character, two hexadecimal values are used to represent it.
  • Seite 5 Note: To cancel the current setting, all the data codes read before are canceled, and the setting needs to be reset after canceling. Digital (hexadecimal) barcode and save codes Save Data (for adding prefix and suffix)
  • Seite 6 Deutsch Tastaur Sprache ändern Folgende Tastatursprachen können eingestellt werden. Sicherheitshinweise • Produkt vor Feuchtigkeit schützen • Produkt vor direkter Sonneneinstrahlung schützen • Schauen Sie nicht direkt in die LED Diode des Scanners Deutsch Akku laden Sie können den Akku des Scanners mit Hilfe der Ladestation laden. Hierfür muss die Station per USB Kabel mit dem System verbunden sein.
  • Seite 7 Terminator Einstellung Präfix Das Präfix ist eine vom Benutzer definierte Zeichenkette vor den dekodierten Daten. Sie können das Präfix hinzufügen und ändern, indem Sie die folgenden Einstellungscodes scannen. Das Präfix kann bis zu 15 Zeichen enthalten. Für jedes Präfixzeichen werden zwei hexadezimale Werte verwendet, um es darzustellen.
  • Seite 8 Hinweis: Um die aktuelle Einstellung zu löschen, werden alle zuvor gelesenen Datencodes gelöscht, und die Einstellung muss nach dem Löschen zurückgesetzt werden. Digital (hexadecimal) Barcode Daten speichern (zum Hinzufügen von Präfix und Suffix)
  • Seite 9 Ascll Attached List Decimal Hexadecimal Character Decimal Hexadecimal Character Decimal Hexadecimal Character < > " & –43...