Panasonic Elite Panaboard UB-T780 Bedienungsanleitung Seite 46

Installation Manual
•
When mounting on a wall, do not hit or jolt
the elite Panaboard.
•
After mounting, gently apply some weight
on the elite Panaboard to make sure that it
is securely fastened to the wall.
Note
•
After installation is complete, use the
included cable holder to manage the power
cord and USB cable.
9.
Wipe the screen board surface.
Gently wipe the screen board surface with a soft,
moist cloth.
Notice
•
Do not use thinner, benzene, or abrasive
chemicals to clean.
(Doing so can result in discoloration.)
•
Do not wipe the screen board with a dry
cloth.
(Doing so can cause static electricity build-
up.)
10.
Confirm that the elite Panaboard can operate.
See "Confirming the elite Panaboard
Operation" (page 46).
44 Operating Instructions (For Basic Operations)
For Mounting on a Stand (Sold Sep-
arately)
1.
Attach the power cord.
•
Connect the power cord to the elite Panaboard
before installing on the stand.
Power Cord
2.
Depending on the location of the outlet, install
the power cord as illustrated in the following
diagrams.
•
When attaching the power cord downward.
•
When attaching the power cord along the lower
side of the elite Panaboard.