Group Error Messages; Terminal Cover; Placeholder Modules; Technical Data - Eaton PXS24 Serie Technisches Handbuch

GROUP ERROR MES-
SAGES

TERMINAL COVER

PLACEHOLDER MOD-
ULES

TECHNICAL DATA

Eaton Industries (Austria) GmbH, Eugenia 1, A-3943 Schrems
www.eaton.eu/documentation
Note: For this set-up, all modules must be connected to the same power supply unit.
If individual error messages are not required, the trip outputs ("Out") of several PXS24 modules
can be connected. A total of at most 30 modules can be connected in this way.
Note: This feature cannot be used simultaneously with the subsequent control.
In some applications, it is necessary to isolate any metal parts that may act as conductors for
extra-low voltage.
For this purpose, we provide the terminal cover PXS24-BBC (PXS24ACC0002). It can be cut to
the required length and snaps over the upper and lower busbar. Only the feeder terminals
(PXS24-IT) can't be secured against any undesired touching in this manner.
To reserve space for later additions, we also offer empty modules that have the same dimen-
sions as live modules:
Article number: PXS24-PCH (PXS24ACC0000)
These can later be replaced with live modules. To make their replacement as simple as possible,
we recommend installing the empty modules at either end (on the left or right). In this manner,
the busbar simply needs to lifted just enough to replace the empty modules with live ones.

Busbar

Article number: PXS24-BB/80A/1m (PXS24BB00001) length: 1m
9
MA-PXS24_System.docx/10.2017a
150501504/IL019139ZU