POWER SUPPLY
Eaton Industries (Austria) GmbH, Eugenia 1, A-3943 Schrems
www.eaton.eu/documentation
2. Cut the busbar to the required length
3. Push the busbar into the upper (+24V) and lower (0V) busbar support. Pushing in
the busbar requires about 15N of force.
Disassembly:
Leverage the busbar out of the support by using an appropriate tool (e.g. a flat screw driv-
er). This requires about 15N of force.
Live modules that feature the addition "IT" (=input terminal) in their article number can
supply the common busbar with up to 20A each (please refer to the technical data of the
respective modules). Modules that do not feature the addition "IT" in their article number
are only supplied via the common busbar. Dedicated feeder terminals are available for
currents exceeding 20A (PXS24-IT; PXS24ACC0001), and a dedicated feeder module is
currently in planning (PXS24-IM; PXS24ACC0001).
Examples:
1.) power supply unit up to 20A
5
MA-PXS24_System.docx/10.2017a
150501504/IL019139ZU