Filter Change - Comedes Lavaero 1200 Betriebsanleitung

Filter change

After some time in operation, the filter elements must be replaced.
1. Filter removal
Always switch and disconnect the device for this purpose.
Remove the
filter cover.
2. The nylon prefilter net can be cleaned under running water and does not need to be
replaced.
3. Now check the filters. If the HEPA element is not yet too discoloured, vacuum it off with
a vacuum cleaner (preferably outdoors).
4. If the filter is very dirty or discoloured, replace it.
5. Please note that the replacement filter must be removed from the protective film before
it can be inserted into the device.
6. Inserting the filter
EN-10
Remove the
prefilter.
Make sure that the filter is inserted with the
tab facing outwards.
When inserting the prefilter, make sure that
the front and rear sides of the filter are
different. The filter is inserted correctly when
the central handle is pointing outwards.
Remove the filter
always first from the
protective film, before
putting it inside the unit.
www.comedes.com