Troubleshooting Guide - Plantronics CA20 Benutzerhinweise

PROBLEM
You experience difficulties during registration
Possible cause
Incorrect Registration
PROBLEM
You cannot hear or be heard
Headset/handset
button not engaged
No power
CA20 Adapter is not
connected correctly
Incorrect configuration
switch settings for
your telephone
Out of range
Remote unit battery
is flat
Headset is not compatible
with remote pack
PROBLEM
Others can't hear you
Mute is selected
Transmit volume is too low
Incorrect configuration
switch settings for
your telephone
Downloaded from www.Manualslib.com
Recharge the battery by placing the remote unit in
manuals search engine

TROUBLESHOOTING GUIDE

Remedy
Ensure that the remote unit has not become
registered with another base unit by removing and
replacing the battery pack, and by un-plugging and
re-plugging the base unit AC Adapter Plug
Push down headset/handset switch so that the
coloured bar is visible above the switch
Check: AC Adapter is connected to the base unit.
Check: AC Adapter is connected to the mains supply.
Check: power indicator on the base unit is illuminated
Check: headset is properly connected to the remote
unit's headset port (19). Check: your telephone is
connected to the base unit's telephone port.
Check: handset is connected to the base unit's
handset port (1)
Try other configuration switch settings (20)
on the base unit
Listen for the warning beeps. Walk back into range
the charging cradle (8)
Contact your supplier to check headset compatibility
Press the mute button (15) on the remote unit.
The mute indicator (16) should then turn off
Adjust the transmit volume (12) on the base unit
Try other configuration switch settings on the
base unit
8