Important Safety Information; Installation - Plantronics AP-2 Kurzanleitung

EN ENGLISH
INFORMATION
This user guide provides you with information on the installation
and use of your AP-2 Accessory Pod.
This AP-2 is suitable for use with the Plantronics CS60, CS70 and
Supraplus Wireless, DECT
series range of telephones from Alcatel.
The AP-2 is NOT compatible with the Voyager
System.
Contact your supplier to check AP-2 compatibility with your
Alcatel phone.
IMPORTANT SAFETY
INFORMATION
Please read the following instructions before use:
• The AP-2 is suitable for indoor use only.
• Use only with the the Plantronics CS60, CS70 and
SupraplusWireless, DECT
series range of telephones from Alcatel.
• Do not spill liquid of any type on the product
• Do not immerse in any type of liquid
2
Downloaded from www.Manualslib.com
systems and with the IPTouch and 9
™
Bluetooth Wireless
™
systems and with the IPTouch and 9
™
manuals search engine
• To reduce the risk of electrical shock, do not disassemble this
product yourself
• Keep all products, cords and cables away from operating
machinery

INSTALLATION

These instructions assume you have already installed your
wireless adapter or headset in accordance with the instructions
detailed in the respective user guide for that product.
Install the AP-2 as shown in the diagram. On the Alcatel telephone,
configure the Jack to accept a headset by selecting the following
options in sequence:
"Menu"/"Settings"/"Phone"/"Jack"/"Headset".
You should also switch OFF the headset option on your Alcatel
telephone (this option is used only for headsets that are plugged
into the handset port). You can do this by selecting:
"Menu"/"Settings"/"Forced Headset"/"OFF".
3