Victure PC730 Handbuch Seite 9

3. Enter camera list screen, click "+" on the top right corner, and select
wireless adding mode.
4. Plug the camera into the power, and press the reset button for 3
seconds, then the indicator will flashes in red slowly with " DI DI "
beeps, which means the device has been reset successfully. If not,
please unplug the power supply and plug it again. Then try to reset it
again.
My camera
360°
5. When indicator is flashing in red slowly, click Next on the App, input
WiFi password, then click Next, turn up the phone volume, and take
the phone close to the camera.
6. Wait for the App to find your camera until a " Dingdong " sound,
and the indicator will keep in green. Then you will hear " Camera
Ready " and see the indicator flashes in green slowly, which means the
device connects to the WiFi router successfully.
7. Finally , a prompt dialogue box will appear to remind you that the
camera is added and you need to rename the camera. After renaming,
you can enter the live video interface and the indicator will flash in
green quickly. If you exit, it will flash in green slowly.
Network mode
Smart wireless mode（recommended)
Connect camera to WIFI
5