Set up mobile detection function
Insert SD card
1. Format the SD on the computer first.
2. Unplug the camera power supply,use a screwdriver to unscrew the screw
and open the SD card slot.
3. Insert SD card.
4. Plug in power supply and wait for camera to power on.
5. Click memory card information, then click format memory card to format
the SD card.
6. After formatting the SD card, exit APP, and log in again.
Camera setting
Change router
Camera information
Memory card information
Firmware upgrade
Restart camera
Refresh setting information
delete camera
Set up motion detection function
1. Click alert mode and open motion detection function.
2. Set up alert time and motion detection sensitivity.
Camera setting
Rename
Shared camera
Shooting angle
Indicator LED
Alert mode
Memory card information
Picture
Status
Total capacity
Remaining capacity
Format memory card
Alert mode
Motion Detection
Alert sound switch
AlarmTime And Sensibility
8
Finish
ON
ON
OFF