Manual operation
Heating
in heating
mode
Selection
of heating
system
For further information regarding the configura-
tion, please refer to the user manual of the
Homematic IP Wall Thermostat (HmIP-WTH-2).
8
Manual operation
8.1
Switch heating zones on/off
For installation and tests you can manually switch single
heating zones on or off. To switch single heating zones
on or off, please proceed as follows:
•
Select the required channel using the select but-
ton (B) (see fig. 7).
Press the select button until the LED (B) flashes
•
green three times.
68
P053
0
1
0
P055
1
2
3
4
Heating in heating
mode deactivated
Heating in heating
mode activated
(default)
Standard floor
heating (default)
Low energy floor
heating
Radiator
Passive convector
Active convector