Werbung
Verfügbare Sprachen
Verfügbare Sprachen
the 30 second count down the LED will flash green
to indicate that the flash in charged. Press B again to
fire the flash (CAUTION - light output from the
flash is very bright!).
Ambush IR: LEd (Ambush
allows you to test Ambush IR's IR LEDs and measure
the battery strength. Press B to test Ambush IR's
infrared LEDs. The LEDs will be driven from 33%
maximum power to 99% maximum power. The test
will stop when the batteries do not have sufficient
power to drive the LEDs or at 99%. If the batteries
are depleted, FAIL will be displayed. If the reading
is below 99% you may want to change the batteries
to maximize the illumination range.
5)
StAt (Statistical Data) – Press B to display Activation
Date, Armed Days, and Image Counter. Activation
Date is the first day you used the camera. Armed
Days is how many days the camera has been used.
Image Counter is the total number of images taken
with the camera.
6) LOAd – Lets you to install new firmware. We
may update the Ambush
to improve its performance. If a firmware update is
required you will need to download a firmware file
from our website. Instructions will be provided with the
firmware. Please see www.cuddeback.com for details.
We recommend you check our website for updates
at the beginning of your scouting season.
7) Firmware Version – 4 numbers will be displayed,
such as 0200. This is the firmware version.
10
IR LEDs) – This menu
®
/Ambush
IR firmware
®
®
Turn the rotary knob to a new setting or press A to
return to the battery level display.
No Card Mode - Using Ambush
Without an SD Card
When Ambush
/Ambush
IR is used without an SD card,
®
®
images are stored in Ambush
image memory. Ambush
/Ambush
®
memory of about 120 MB. This will allow storage of up
to 120 images. Images can be transferred from internal
memory to an SD card.
Transfer to SD card: If you use Ambush
without an SD card, follow these steps to transfer the
images from the internal memory to an SD card.
1) If Ambush
/Ambush
IR is not armed, turn the
®
®
rotary knob to any of the Armed positions.
2) If Ambush
/Ambush
IR is armed, press A to display
®
®
the number of images in internal memory.
3) Insert your SD card into Ambush
4) Press A. The amount of free space on the SD card
will be displayed.
5) Press B to initiate the transfer. Images saved in
internal memory will be copied to the SD card. The
LCD will display the worm on the left, and the
percentage of files copied on the right. Please wait
while images are being copied.
6) When the LCD displays the battery level, the transfer
is complete and all the images on the internal memory
have been erased.
/Ambush
IR
®
®
/Ambush
IR's internal
®
®
IR features an internal
®
/Ambush
IR
®
®
/Ambush
IR.
®
®
11
Werbung
