Cuddeback Ambush Bedienungsanleitung Seite 7

4) Ambush /Ambush IR
® ®
features our Genius Mount-
ing System. This system
allows you to attach the
bracket to a tree and then
slide Ambush /Ambush
®
on and off the bracket as
needed.
5) Once the tree bracket is
attached to the tree, make
sure both thumb screws on
the back of Ambush
®
completely. Then slide Ambush
the bracket.
6) It is best to remove any vegetation and obstructions
from Ambush /Ambush
®
interfere with Ambush
7) Aim/align Ambush
®
pointed where you expect the animals to be. Aim
Ambush /Ambush IR level with the ground to
® ®
maximize detection range and performance. You can
use Ambush /Ambush
®
next) to help you determine the detection area.
8) Cuddeback has optional mounting methods available,
®
such as tilt-brackets, bear-resistant boxes, and
mounting posts. See your retailer or visit
www.cuddeback.com for details.
6
IR
®
/Ambush IR are tightened
®
/Ambush IR onto
® ®
IR's field-of-view that may
®
/Ambush IR's sensor or camera.
® ®
/Ambush IR to make sure it is
®
IR's test feature (explained
®
Step 5 – Checking Ambush
Detection Zone
1) Turn the rotary knob to the Test position. Close the
cover and tighten the thumb screw. Put Ambush
Ambush IR back onto the tree bracket. (Note: there
®
is a more convenient method to enable test mode,
see Step 7 - Checking your
IR
for details).
2) Walk back and forth in front of Ambush
The red LED will illuminate when Ambush
Ambush IR's sensor has detected you. Using this
®
method you can accurately position your Ambush
Ambush IR as desired.
®
Step 6 – Arming the Ambush
You can program the Ambush
images, or still images AND videos. Turn the rotary knob
to either the Video Off setting or the Video On setting
as desired. The settings represent the amount of time the
Ambush /Ambush IR will wait before it is armed and
®
®
ready to take another image. This delay time prevents
multiple images of the same animal. Here is our recom-
mendation for the various Armed settings:
a. Under 30 seconds – game trails
b. 1 and 3 minutes – scrapes, food plots or feeders
When first armed, Ambush /Ambush
®
indicated delay for 5 seconds and then begin counting
down from 30 to 0. When the counter reaches 0,
/Ambush IR's
® ®
/
®
Ambush /Ambush
® ®
/Ambush IR.
® ®
/
®
/
®
/Ambush IR
® ®
/Ambush IR to record still
® ®
IR will display the
®
7