Cuddeback Ambush Bedienungsanleitung Seite 8

Ambush /Ambush IR will arm and be ready to record images.
® ®
When Ambush /Ambush
®
a picture, a "worm" will be displayed and the LED will
flash red and green – do not remove the SD card until the
LED is OFF. After the image is saved to the SD card, the
LCD will display the delay setting and begin counting
down. Once the counter reaches 0, Ambush
is ready to record the next image.
Step 7 – Checking Ambush
When you check Ambush
sary to turn the rotary knob. Instead, press the A or B
button to temporarily suspend Armed mode and view
pertinent information, such as the number of images on
the SD card and battery level. Each time you press the A
or B button new information will be displayed. Here is
the sequence of information that is displayed each time
the A or B button is pressed.
1) Images on SD card. Note the ARMED, DWELL,
and IMAGES icons are displayed.
2) Free Space on SD card in MB. Note that ARMED
and DWELL icons are displayed.
3) Battery Level as a percentage. For example,
bt:99 means there is 99% battery power left.
4) Time
5) Date
6) Year
8
IR detects a subject, and takes
®
/Ambush
® ®
/Ambush IR
® ®
/Ambush IR it is not neces-
® ®
7) Test indicates Ambush
and will illuminate the red Test LED when activity
is sensed.
8) Pressing A or B again will Arm the camera and
the current delay setting will be displayed.
You can leave Ambush
IR
1 thru 7 and Ambush
re-arm in about five minutes. This allows you to close the
cover and leave the area without triggering an image.
Step 8 – More Features
Menu Position
Turn the rotary knob to the MENU position to perform
various activities. Press A to advance to the next menu
item, press B to activate the displayed menu action.
1) Battery Level – the battery level is displayed in the
format bt:99, which is a percentage of remaining
battery power. Press the A button to advance to the
next menu item.
2) CLr (Clear SD card) – This menu allows you to
clear all images and content on the SD card. Press
and hold B to clear the card. The worm will
appear and the LEDs will flash RED. When finished,
the LCD will display the amount of space on the SD
card in MBs. Press A to advance to the next menu item.
3) Pic – Lets you take a test picture. Press B to take
a picture. Press A to advance to the next menu item.
4) Ambush: FLSH - This menu allows you to test
Ambush's flash. Press B to charge the flash circuit.
The LCD will begin counting down from 30. After
/Ambush IR is in Test mode
® ®
/Ambush IR in any of the states
® ®
/Ambush IR will automatically
® ®
9