Operating The Appliance - VINCENT SV-200 Bedienungsanleitung

Operation
Switch on and off
Select an input
Change the volume

OPERATING THE APPLIANCE

Button(s) Description
The preamplifier is switched on and off using this button at the front panel.
It has no standby option. When switched off the device is internally separa-
POWER (4)
ted from the AC power. As a precaution, after switching on, the volume set-
ting (3)(23) of the preamplifier should be reduced.
At the front panel: If you turn the dial "INPUT", you select one of the devi-
ces connected to the inputs on the back of the SV-200 (8) for playback.
INPUT (1)
Using the remote control: A short touch on the button for the desired input
channel (e.g. "S1") changes to the playback of the audio source connec-
Input
ted there.
selection
The LED associated to the selected input channel will be illuminated at the
keys (22)
front of the appliance. Before switching over the input channel, the volume
(3)(23) should be turned down as a precaution!
At the front panel: Turn the knob "VOLUME" clockwise to turn up the volu-
VOLUME (3) me and counter-clockwise to turn it down.
Using the remote control: Press and hold the button "VOLUME
VOLUME
its value. Use "VOLUME
q
/ (23) The volume setting controls the speakers and the signal level at the "PRE OUT"
(10) but does never influence the signal at the output "REC OUT" (9).
q
" to lower the volume level.
" to raise
Vincent
41