Herunterladen Inhalt Inhalt Diese Seite drucken

ASROCK K10N78hSLI-GLAN Bedienungsanleitung Seite 26

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 30
2 . 1 3
2 . 1 3 Installing Windows
2 . 1 3
Installing Windows
Installing Windows
Installing Windows
2 . 1 3
2 . 1 3
Installing Windows
Vista
Vista
Vista
Vista
Vista
64-bit W
64-bit W
64-bit W
64-bit W
64-bit Without RAID F
TM
TM
TM
TM
TM
If you want to install Windows
TM
Vista
64-bit on your SATA / SATAII HDDs without RAID functions, please follow below
procedures according to the OS you install.
2.13.1 Installing Windows
2.13.1 Installing Windows
2.13.1 Installing Windows
2.13.1 Installing Windows
2.13.1 Installing Windows
F F F F Functions
unctions
unctions
unctions
unctions
If you want to install Windows
without RAID functions, please follow below steps.
Using SATA / SATAII HDDs and eSATAII devices with NCQ and Hot Plug functions
STEP 1: Set Up BIOS.
A.
Enter BIOS SETUP UTILITY
B.
Set the "SATA Operation Mode" option to [non-RAID].
STEP 2: Make a SATA / SATAII driver diskette.
A.
Insert the ASRock Support CD into your optical drive to boot your system.
(There are two ASRock Support CD in the motherboard gift box pack, please
choose the one for Windows
B.
During POST at the beginning of system boot-up, press <F11> key, and
then a window for boot devices selection appears. Please select CD-ROM
as the boot device.
C.
When you see the message on the screen, "Generate Serial ATA driver
diskette [YN]?", press <Y>.
D.
Then you will see these messages,
Please choose:
1. Generate AHCI Driver diskette for WindowsXP
2. Generate RAID Driver diskette for WindowsXP
3. Generate AHCI Driver diskette for WindowsXP64
4. Generate RAID Driver diskette for WindowsXP64
5. Exit
Reboot system now
Press any key to continue
Please insert a floppy diskette into the floppy drive. Select your required
item on the list according to the mode you choose and the OS you install.
Then press any key.
E.
The system will start to format the floppy diskette and copy SATA / SATAII
drivers into the floppy diskette.
STEP 3: Set Up BIOS.
Please follow step 1 to set up the BIOS option "SATA Operation Mode" to [AHCI].
2 6
2 6
2 6
2 6
2 6
ASRock
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
®
ithout RAID F
ithout RAID F
ithout RAID Functions
ithout RAID F
unctions
unctions
unctions
unctions
®
®
XP, Windows
XP 64-bit, Windows
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
®
®
XP / Windows
®
XP 64-bit on your SATA / SATAII HDDs
Advanced screen
®
XP / XP 64-bit.)
K10N78hSLI-GLAN
Motherboard
/ / / / /
TM
TM
TM
TM
TM
®
TM
®
Vista
or Windows
IDE Configuration.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis