M-WAVE FOLD 2 IN 1 Installationshandbuch Und Sicherheit Bei Der Anwendung Seite 8

ATTACHING THE TRAILER TO THE BICYCLE
Loosen the nut on the left side of the rear hub (opposite the pinion), place the connecting bolt
on the thread of the hub and retighten the nut fi rmly.
Attach the trailer coupling to the axle using the safety pin. Secure the pin with the clamping
spring. Place the safety strap around the rear struts of the bicycle frame and hook it back into
the trailer coupling.
CAUTION:
Always align this drawbar with the trailer before transporting anything with your bike and trailer.
To disconnect the trailer, loosen the safety pin and the safety strap. To dismount the connecting
bolt, unscrew the rear hub nut.
CAUTION:
If the trailer coupling does not work properly or does not fi t well with the bike or other
accessories, do not use it.
Never use the trailer without the connector of the trailer coupling.
[ 8 ]
EN