M-WAVE FOLD 2 IN 1 Installationshandbuch Und Sicherheit Bei Der Anwendung Seite 6

ASSEMBLY AND DISMOUNTING OF THE WHEELS
Place the trailer on the back to be able to assemble the wheels. Press the tension spring of the
safety lever to insert the axle. After releasing the spring, check that the wheel is fi rmly locked to the
frame and cannot be loosened.
a) Press the safety b) insert the axle
lever drücken in the opening
To remove the tyres, lift up the rear of the trailer. Unlock the quick lock with a simple push and pull
the tyre.
CAUTION:
Improper assembly and / or adjustment of the tyres with the quick-release lever can cause a tyre to
detach during the ride and cause serious injury. Be sure to periodically check the condition of the
tyres and the correct tyre pressure.
MOUNTING OF THE FABRIC BAG
Position the fabric bag in the aluminum frame and attach it to the top frame tube with the plastic
clips. Use the bottom strap with the Velcro straps to additionally connect the bag to the underside
of the bottom of the frame.
ASSEMBLY OF THE REFLECTORS
Attach the red refl ectors to the back of the trailer and tighten the screws suffi ciently.
The yellow cat's eyes are each fi rmly clicked on the spokes of the tyres.
[ 6 ]
EN