M-WAVE FOLD 2 IN 1 Installationshandbuch Und Sicherheit Bei Der Anwendung Seite 7

ASSEMBLY OF THE SAFETY FLAG
Insert the rod into the sleeve provided at the rear left corner of the side panel and join the two
parts of the rod together.
ASSEMBLY AND MOVING THE HAND DRAWBAR
There are two positions for the hand drawbar, for parking and for pulling the trailer.
a) Upper holes for parking
Insert the safety pins into the respectively upper holes to bring the drawbar into
parking position.
b) Lower holes for riding and pulling
Insert the safety pins into the respectively lower holes to bring the drawbar into
pulling position.
c) If you use the trailer on the bike, fi x the hand drawbar 180 degrees backwards.
To store the trailer, reverse these steps. Be sure to connect the drawbar fi rmly to the trailer.
b)
a)
[ 7 ]
c)
EN