TFA 60.2547 Bedienungsanleitung Seite 15

TFA_No. 60.2547_Anleitung_11_19
Radio-controlled alarm clock
• and appear. 6:00 (default) or the last adjusted first or
second alarm time appear on the display.
• The hour digits (Alarm 1) flash.
• Press the + or – button to adjust the hours.
• Confirm the setting with the ALARM button.
• Set the minutes in the same way.
• Set the alarm time for the second alarm in the same way as the
first alarm time.
• To activate the corresponding alarm function, move the ALARM
switch upwards (ON).
• The alarm time with the activated alarm symbol appear on the dis-
play.
• When the adjusted alarm time is reached, the alarm rings.
• Press any button (except SNOOZE/LIGHT) and the alarm will stop.
• If the alarm is not stopped manually, the ascending alarm tone
automatically turns off after two minutes and it will be reactivated
at the same set time on the following day.
• The alarm symbol remains on the display.
• When the alarm rings, press the SNOOZE/LIGHT button and the
snooze function is activated.
28
14.11.2019 19:17 Uhr Seite 15
Radio-controlled alarm clock
• Once the snooze function is activated, the snooze symbol will be
flashing on the display.
• The alarm will be interrupted for 5 minutes.
• To deactivate the corresponding alarm function, move the ALARM
switch downwards (OFF). The alarm symbol disappears.
7. Backlight
• Press the SNOOZE/LIGHT button.
• The backlight turns on for 8 seconds.
• The device is provided with a light sensor to turn on the light auto-
matically when it is dark.
• Use the AUTO LIGHT ON/OFF switch at the back to activate or deac-
tivate the automatic backlight.
8. Care and maintenance
• Clean the device with a soft damp cloth. Do not use solvents or
scouring agents.
• Remove the batteries if the device will not be used for an extended
period of time.
• Keep the device in a dry place.
29