4Bay 2,5" Dual Channel Sata/Sas Hdd Backplane - RaidSonic Technology ICY BOX IB-2222 Serie Handbuch

http://www.icybox.de http://www.icybox.de
4bay 2.5" Dual Channel SATA/SAS HDD Backplane
5. Indication of LED
Action LED Indication
HDD Power on Front-LED-3 shines blue
HDD access Front-LED-4 blinks green
HDD failure Front-LED-4 blinks red
No HDD Front-LED-3 remains off
6. HDD assembly
7. Configuration on the Back Panel
A. Location
1~4 – Primary connector
5~8 – Secondary connector
9~10 – 40 mm fan
11, 13 – 5V/12V Power connector
12 – HDD fail signal in
B. Connecting the SATA Cable
Take the primary connector for single channel.
Take the primary and secondary connector for
dual channel.
C. Connecting the HDD Failure Signal Cable
to the Host Controller
If the host controller (e.g. RAID card) has HDD failure signal OUT connectors, you can connect them
with the "HDD Fail Signal In", figure "12" on the back panel of the backplane. So the HDD failure LED will
blink in red color when the HDD fails.
IB-2222 Series
5 5