Technical Information - Level
Technische Information - Füllstand
Mounting Clamps for Detector
Befestigungsschellen für Detektor
for Detectors without Water Cooling
für Detektoren ohne Wasserkühlung
for Detectors with Water Cooling
für Detektoren mit Wasserkühlung
Position for the clamps, see detector drawing.
Position für die Schellen-Befestigung siehe Detektor-
Zeichnung.
Dimensions in mm
Abmessungen in mm
Material: 316Ti 1.4571
Werkstoff: 316Ti 1.4571
Part No. 31346 (1 set = 2 clamps)
Id. Nr. 31346 (1 Set = 2 Schellen)
Part No. 31345 (single clamp)
Id. Nr. 31345 (einzelne Schelle)
Dimensions in mm
Abmessungen in mm
Material: 316Ti 1.4571
Werkstoff: 316Ti 1.4571
Part No. 31347 (1 set = 2 clamps)
Id. Nr. 31347 (1 Set = 2 Schellen)
Part No. 31344 (single clamp)
Id. Nr. 31344 (einzelne Schelle)
56925TI1L Rev.03, 05/2020