Connecting The Notebook To The Port Replicator - Fujitsu ESPRIMO Mobile Port Replicator Handbuch

Connecting the notebook to the Port Replicator

If you connect the notebook to the Port Replicator during operation, problems can
occur. We recommend that you switch off the notebook beforehand.
When the notebook is connected to the Port Replicator, you must connect the mains
adapter to the Port Replicator. Otherwise some connections will not function.
If the notebook is connected to the Port Replicator, then only the audio
ports on the Port Replicator will be operational.
When the notebook is connected to the Port Replicator, we recommend that the
notebook not be operated with the LCD screen closed. The resulting overheating can
cause reduced performance and increased activity of the integrated fan.
PortReplicator
► Switch the notebook off.
► Unplug the mains plug of the mains adapter from the mains socket.
► Disconnect the mains adapter cable from the DC socket (DC IN) of the notebook.
► Position the notebook so that it is in line with the back edge of the Port Replicator.
► Place the notebook onto the Port Replicator (1) and ensure that it locks into place correctly.
A26391-K260-Z140-1-8N19, edition 1
Preparation for use and operation
1
English - 5