Preparation For Use And Operation; Unpacking And Checking The Delivery; Setting Up The Port Replicator - Fujitsu ESPRIMO Mobile Port Replicator Handbuch

Preparation for use and operation

Please observe the safety information in

Unpacking and checking the delivery

Deliverynote Damage duringtransport Contentsofdelivery Packaging
► Unpack all the individual parts.
► Check the delivery for damage incurred during transportation.
► Check whether the delivery conforms to the details in the delivery note.
Should you discover that the delivery does not correspond to the delivery
note, notify your local sales outlet immediately.
Do not discard the original packing material of the devices. You may need the
packaging in the future if you need to transport your device.

Setting up the Port Replicator

Select a suitable location for the Port Replicator before setting it up. Consider
the following points when selecting a location:
• Never place the Port Replicator on a soft surface (e.g. carpeting, upholstered
furniture, bed). This can block the air vents and cause overheating and damage.
• Place the Port Replicator on a stable, flat and nonslippery surface. Please
note that the rubber feet may mark certain types of surfaces.
• Never place the Port Replicator and the mains adapter on a heat-sensitive surface.
• Never cover the fan intake or exhaust openings of the Port
Replicator or the mains adapter.
• The Port Replicator should not be exposed to extreme environmental conditions.
Protect the Port Replicator from dust, humidity and heat.
A26391-K260-Z140-1-8N19, edition 1
Preparation for use and operation
"Important notes", Page 2.
English - 3