BeeWi BBH120 Bedienungsanleitung Seite 6

6
- Your phone will find the "BeeWi BBH120" and ask if you want to pair
with it. Accept and confirm with the passkey or PIN = 0000 (4 zeros).
Your phone or other device will confirm when pairing is complete. After
successful connecting, the blue light of the headphone blinks twice every 4
seconds. In case of unsuccessful pairing repeat steps 1 to 3.
To connect another device, repeat the process after switching off the first
device.
- Note: To manually put the headphones into pairing mode: when the
headphone is turned on, press and hold the key for 5 seconds until the
indicator light is blinking blue / red.
6. Connection et use
The last phone paired will always reconnect when switching on the
headphones. If connection is lost, it is possible to manually reconnect by
pressing .
You can use key for answering, initiate or end a call, key to play or
pause music and volume wheel to adjust sound volume and change tracks.
For more information, see section 7.
Note: In case the mobile phone is connected in both HFP Hands free
profile and A2DP stereo music profile, the hands-free profile will be
prioritized when a call is received or sent.
As soon as the call ends, the music will start again automatically.
Note: You can connect two devices at the same time to enjoy hands-
free communication and music streaming, only if they are using different
profiles (one is using HFP, the other AD2P). When one profile is being
used by one device, it cannot be used by another.
After having paired the headphones with your mobile phone, you can pair
it with your music player or PC. The music player will use audio streaming
profiles (A2DP and AVRCP), so you can use music playback and remote
control features and the phone will use the hands-free profiles so you can
use the phone features.
Note: In order to save the battery, the headphone will automatically switch
off after 10 minutes of inactivity.
To switch between wired and Bluetooth wireless mode, just plug or
ENGLISH