Other Convenient Functions - Sharp R-20ST Bedienungsanleitung

OTHER CONVENIENT FUNCTIONS

1. SEQUENCE COOKING
This function allows you to cook using up to 2 diff erent stages which can include manual cooking time and
mode and/ or time defrost as well as weight defrost function. Once programmed there is no need to interfere
with the cooking operation as the oven will automatically move onto the next stage. An audible signal will
sound once after the fi rst stage. If one stage is defrosting, it should be in the fi rst stage of sequence cooking.
NOTE: Auto menu cannot be set as one of the multiple sequences.
Example: If you want to defrost food for 5 minutes, then cook with P80 microwave power for 7 minutes.
The steps are as follows:
- 1. Press the WEIGHT DEFROST/TIME DEFROST button twice, dEF2 will appear in the LED display.
- 2. Enter the defrosting time by rotating the ENTRY dial until the display shows "5:00" minutes.
- 3. Press the MICROWAVE POWER LEVEL button once.
- 4. Input the power level by pressing the MICROWAVE POWER LEVEL button once more for P80 or turn the
ENTRY dial to select the microwave power to P80.
- 5. Press the START/+30sec/ CONFIRM button once more to confi rm the setting.
- 6. Enter the cooking time by rotating the ENTRY dial until the display shows "7:00" minutes.
- 7. Press the START/+30sec/ CONFIRM button to start the sequence cooking.
2. +30sec FUNCTION (Direct start)
a. Direct start
You can directly start cooking on P100 microwave power level for 30 seconds by pressing the START/+30sec/
CONFIRM button. The cooking process will start immediately and each time the button is pressed this will
increase the cooking time by 30 seconds.
b. Extend the cooking time
You can extend the cooking time during manual cooking and time defrost in multiples of 30 seconds if the
START/+30sec/ CONFIRM button is pressed while the oven is in operation. During the weight defrost, auto
menu function and sequence cooking, the cooking time cannot be increased by pressing START/+30sec/
CONFIRM button.
NOTE: The cooking time may be extended to a maximum of 95 minutes.
3. DELAY START
DELAY START cooking allows you to program the oven to start cooking at a point later in the day.
Before setting, make sure the clock is set to the correct time of day.
Example:
Follow the example below for starting the microwave automatically at a later point of time for 7 minutes on
P80. The maximum time-delay is 23 hours and 59 minutes.
- 1) Press the MICROWAVE POWER LEVEL button once and turn the ENTRY dial to select the microwave
power to P80.
- 2) Press the START/+30sec/ CONFIRM button to confi rm the setting.
- 3) Enter the cooking time by rotating the ENTRY dial until the display shows "7:00" minutes.
After the above steps, please do not press START/+30sec/ CONFIRM button.
- 4) Press the CLOCK SET/ DELAY START button. The display will show the current time and the hours fi gure
will fl ash.
- 5) Rotate the ENTRY dial to set the hour of the desired start time for cooking.
The input time should be within 0-23.
- 6) Press CLOCK SET/ DELAY START button and the minutes fi gure will fl ash.
- 7) Rotate the ENTRY dial to set the minutes of the desired start time for cooking.
The input time should be within 0-59 minutes.
- 8) Press the START/+30sec/ CONFIRM button to confi rm the setting for the delay start. The icon of the digital
time will light.
When the pre-programmed time arrives, an audible signal will sound twice and the oven starts
automatically for 7 minutes on P80.
GB-20