Beper P202ASP400 Betriebsanleitung Seite 8

Car vacuum cleaner Use instructions
Product and accessories fig.A
1. Container
2. Suction vent
3. Release button
4. ON / OFF switch
5. Ventilation openings
6. Filter
7. Cigarette lighter cable
8. Crevice nozzles
9. Brush
10. Flexible hose
Instructions for use
Press the release button, remove the container and check that the suction filter is securely fastened.
Insert the desired accessory into the suction vent.
Insert the cable into the cigarette lighter of the car.
Press the ON / OFF button and vacuum the material.
At the end, switch off the appliance by pressing the ON / OFF button again.
Remove the cable from the cigarette lighter.
Empty the container after vacuum , or when the container is full, by pressing the release button.
Cleaning
Switch off the appliance before cleaning it.
The outer body, the container, the suction accessories can be cleaned with a soft cloth dampened with hot water.
Do not clean with diluents, abrasive products, detergents for plastic or other; could damage the surface.
Take care not to penetrate liquids inside the slots of the appliance.
In order to maintain product performance over time, we recommend cleaning the filter regularly.
Technical Data
DC 12V-5.84A-70W
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
8