Blaupunkt BSM501 Bedienungsanleitung Seite 4

BSM501
1. Display
1a. Gender
1b. Age
1c. Fat % / Muscle % / Bones %
1d. Hydration
1e. Obesity index (lean, slim, normal, obese, very obese)
REPLACING THE BATTERIES
1. Open the battery cover on the bottom of the device. Remove the used battery.
2. Insert a new battery paying attention to the proper polarity.
WEIGHT MEASUREMENT
Make sure the batteries are operational and inserted into the device. Place the scale on a flat, hard
surface.
Step on the scale. It will start automatically and calibrate, then it will indicate the result of the
measurement. Wait for the result to stabilize, it will pulse for some time, then the scale will turn off
automatically.
USER PROFILE SETTING
The scale has a memory for 12 user profiles. The range of height is from 100 to 250 cm, age from 10 to
100 years.
The parameter selection process starts by pressing the SET button. The parameter value is changed by
, buttons. Confirm and move to the next one by pressing the SET button:
1. Profile number selection
2. Sex selection
3. Height
4. Age
When the last parameter has been confirmed, the scale will display 0.0 and then will automatically turn
off.
If the scale is on and displays 0.0, press the SET button for 3 seconds to enter settings.
WEIGHT MEASUREMENT WITH ANALYSIS
Start the scales by pressing the SET button. Select the user profile with the , buttons. Step on the
scales to display 0.0. Get on the scales. Wait for the
measurement is complete, the scales will display the following results three times: weight, % body fat
(along with the obesity scale), % hydration,% muscle tissue,% bone tissue, the recommended daily
amount of calories, and BMI. Then the scales will turn off automatically.
DISPLAYING THE LAST MEASUREMENT FOR A PROFILE
Start the scale by pressing the SET button. Select the user profile with , buttons. Step on the scale
or wait 6 seconds, the scale will display 0.0. Press the button to retrieve last measurements. To skip
pages faster, use the , buttons. The scale turns off automatically after displaying the measurements
three times.
CHANGING THE UNITS
To change units from metric (kg) to imperial (lb, st) or vice versa, start the scale and find the units
change button. Press the button to change units.
1f. Calorie units
1g Weight units
1i. Height units
2. Scales platform
3. Buttons (SET,
measurement to complete. When the
2
, )