Video Mode - Xblitz Z9 Bedienungsanleitung

MENU
RESET
04. MENU
A. VIDEO MODE
1. Video resolution
Set the resolution of recordings. The higher the resolution, the better
the video quality, however such files take more space on the memory
card.
2. Loop recording
Set the length of the video recordings.
3. WDR
This function depends on dynamic change of underexposed and
overexposed values of monitored field in order to expose
underexposed elements.
4. Exposure
Set the video exposure.
5. Motion detection
When turning this function on and leaving the camera in standby
mode, plugged into the power supply, after detecting a motion camera
starts to record a short, 10-seconds movie.
6. Audio recording
Turning on / o the sound on the recordings. This may be set outside
the menu by using the "down" button.
7. Date stamp
Turning the date stamp on / o on the recording.
8. G-SENSOR
Setting the sensor sensitivity or turning this function o . When the
sensor is on in the moment of collision, the file is automatically
protected from being overwritten. It is recommended to set the lowest
possible value (low or medium) so the camera does not detect road
inequalities.
Longer press opens the context menu (unless the
camera is recording at the moment). Press again to go
back to the main menu.
In menu and playback mode it navigates us between
positions.
During video playback it scrolls the video backwards.
During video recording short press turns on / o
the parking mode.
Press to restart the camera and restore the default
settings.
23