Getting Started - Xblitz Z9 Bedienungsanleitung

02. GETTING STARTED

1. Mount and connect the camera into the power adapter. (refer to
the hints on page 19)
2. Insert (already formatted into the FAT32 file format) microSD
memory card. NOTE: the memory card should be putted in /out only
when the device is o .
3. Set in the menu:
a. Date & time
b. Loop recording (adjust the length of the recordings). If you turn
loop recording o , the files will not be overwritten.
c. Set the highest available resolution.
d. Set the G-Sensor on minimal possible sensitivity so the camera
does not detect road inequalities and protects unnecessary videos.
e. Turn WDR on.
4. Make sure that the motion detection and parking mode are turned
o . If these functions stay on during normal usage, they will
negatively a ect the recordings. Turning these functions on is
recommended only when the vehicle is parked.
5. Camera will automatically start to record every time we turn
the ignition on (unless there is no constant power supply in the car
cigarette lighter socket of your vehicle).
03. KEYS DESCRIPTION
MODE
POWER
Longer press moves us between camera modes:
video / photo / playback.
In video mode short press turns on / o the sound
recording.
During video recording longer press protects the video
from being overwritten.
During playback of the video press to scroll forwards.
Hold for 3 sec to turn on / o the camera.
In video mode it turns on / o the recording.
In photo mode short press to take a picture.
During playback of the video short press works as
a play / pause.
22
EN