Kenwood IC700 Serie Bedienungsanleitung Seite 6

know your Kenwood
steam station
lock for continuous steam
steam button
temperature control with
indicator light
soleplate
water tank cover
water tank
water tank guard rail
iron rest
cord cactus locations
power supply cord
cord storage
outlet for detachable iron
steam supply cord
boiler cap
variable steam control
low water indicator light
on/off button
ready to steam indicator light
outlet for Multicare accessory kit*
carry handle
cord cactus
detachable iron
PTFE soleplate not illustrated
(model IC800 series only)
* The Multicare accessory kit model
ICK01 is not included with model
IC700 series, but can be purchased
separately by contacting the shop
where you purchased the steam
station.
using your steam station
1 Fit the detachable iron into it's
socket: Lower the outlet cover, then
with the arrow on the connector
uppermost, push into the socket
until fully home. To remove, squeeze
the ribs on either side of the
connector and pull out
remove the iron by pulling on the
cord.
2 Place the steam station on the
3 Fit the cord cactus into one of the
1 Lift off the water tank cover and fill
2 Remove the tank by lifting off. Lift off
G
G
. Never
3
support of the ironing board or any
other stable surface nearby with the
iron sitting on the iron rest. Make sure
the steam station is unplugged and
that the power and steam supply
cords are unrolled and not kinked.
cord cactus locations. Place the
steam supply cord into one of the
grooves on the other end of the cord
cactus. This will keep the cord in an
upright position.
filling with water
Either
with water. Replace the cover.
Or
the cover, then fill the tank under the
tap. Re-fit the cover. Replace the
tank into its original position by
gently pushing into place.
Filtered water is best as it reduces
limescale, prolonging the life of your
steam station (Kenwood water filters
are widely available). Alternatively
use tap water.
If you need to refill your steam
station during use, we recommend
the empty water tank is removed for
filling. If filled whilst fitted, always
unplug the steam station first.
choosing the right
temperature
Follow the clothes label advice.
Match the dots on the label to the
dots on the temperature control. If
there's no label, here's a guide on
which temperature to choose: