Residual Risks; Noise; Vibrations; Safety Pictograms - Femi job Line DP 12-942 Bedienungsanleitung

4.2. Residual risks

RESIDUAL RISK DESCRIPTION
In the event of accidental con-
tact of body parts with the tool
DANGER OF
when
ACCIDENT
detached from the processed
piece, or breakage of the tool.
If the base was not secured to
DANGER OF
the floor, the machine may be-
CRUSHING
come unstable.

4.3. Noise

SOUND PRESSURE LEVEL
Sound pressure level LpA
Sound power level LWA
Uncertainty of measurement K
The noise values indicated are emission levels
and not necessarily safe operating levels. While
there is a correlation between emission levels
and exposure levels, this cannot reliably be
used to determine whether or not further safety
precautions are needed. Factors that influence
the real level of a worker's exposure include
the duration of exposure, the characteristics
of the working environment, other sources of
noise, for example the number of machines
or operations being carried out in the near
vicinity. Furthermore, levels of safe exposure
may be fixed differently from one country to
another. This information does however help
the machine user to better assess the hazards
and risks.
It is advisable to use suitable
hearing
earmuffs or earplugs.

4.4. Vibrations

The mean frequency-weighted r.m.s. hand-arm
acceleration value in normal cutting conditions
using correctly sharpened blades, is less than
2.5 m/sec .
2
Test measurements were carried out in
accordance with Standards EN ISO 5349-1 and
EN ISO 5349-2.
Vibrations during real machine use may differ
from those declared as the total vibration value
depends very much on how the machine is
used.
It is therefore necessary to identify the most
INSTRUCTION MANUAL - TRANSLATION OF ORIGINAL INSTRUCTIONS
operating, fragments
89.8 dB (A)
78.3 dB (A)
4 dB
protection such
appropriate safety measurements to safeguard
the operator based on estimated exposure
times and real conditions of use.

4.5. Safety pictograms

POS.
SYMBOL
OF
A
WARNING
• LASER RADIATION
B
• DO NOT LOOK AT THE BEAM
• CLASS 2 LASER DEVICE
• WAVELENGTH 650 mm
• OUTPUT POWER < 1 mW
C
D
E
B
as
DESCRIPTION
CE plate
Laser attention plate
Serial number/
Year of manufacture
Read the manual
Use PPE
A C
D E
English ▪ 19