Error Messages; Technical Data - ADE KE 1424 Muriel Bedienungsanleitung

Thank you for deciding to purchase this high-quality product from the ADE Company.
You have purchased a set of scales of the highest technical standard and proven quality.
Please read through this operating manual carefully before starting-up the scales for the
first time, and keep it in a safe place so that this information is available to you when you
need it.
1. Start-up
Inserting the batteries:
Open the battery compartment cover at the back of the scales and insert the provided
batteries (2 x 1.5V AAA). Please be mindful of the correct polarity of the batteries (+/-).
Safety information:
Please take care not to let any objects fall onto the scales,
otherwise the scales could be damaged.
Only clean the scales with a damp cloth. Do not use any solvents or
abrasive cleaning products. Do not immerse in water. All plastic
parts of the scales should be cleaned immediately after contact
with fat, spices, vinegar and other strongly seasoned and coloured
foodstuffs. Avoid contact with citric acid.
2. Operation
Activating the sca les:
Place the scales on an even and firm surface. The scales make use of highly sensitive
sensor buttons (Sensor Touch). To activate the scales touch the SS |
bottom right of the display. The figures "8888" will first appear on the display. After the
scales have stabilised, "0 g" or "0: 00 lboz" will appear depending on the settings. The
scales are now ready for weighing.
Plea se note: If, after activating the scales, a weight-value is displayed, touch the SEC |
TARE -button to set the scales to zero.
Chan ging the un it of weight:
By touching the MIN | G/LB -button you can change the country-specific unit of weight
(g = gram / lboz = pound ounce). Please make sure that the scales are set to the unit of
weight relevant to you.
Zeroing-(Tare)-func tion:
By touching the SEC | TARE -button you can set the scales to "0 g". Activate the scales
and place, for example, a bowl on the weighing platform, press the SEC | TARE -button
and thus set the scales to "0 g" again. This process can be repeated as often as you like
until the total capacity of the scales (5 kg) is reached. After removing the weighed item the
total weight will be displayed as a negative value.
Automatic / manua l deactivation of the sca les:
If the displayed weight does not change within approx. 30 seconds, the backlight
-button on the
2
deactivates and after approx. 3 minutes the scales automatically deactivate. By touching
the SS | -button for approx. 2 seconds you can also manually deactivate the scales
after using them, in order to conserve battery power.
3. Timer
Setting the timer:
Touch the SS | -button in order to activate the scales. Touch the SS |
second time in order to get to timer mode. The letters "M" (minutes) und "S" (seconds) as
well as the indicator "00:00" (time setting) will appear on the display. If you have already
used the timer function, the previously specified time will appear. By simultaneously
pressing the MIN | G/LB and SEC | TARE buttons you can reset the time display to
"00:00". Now by touching the MIN | G/LB -button you can set the desired minutes, and
by touching the SEC | TARE -button you can set the desired seconds. To set the values
more quickly, hold your finger down on the respective button. After entering the desired
time, touch the SS | -button again to confirm. The timer will count down and after
reaching the end a loud beep will sound for approx. 60 seconds. Stop the beeping by
touching a button. During countdown the timer function can, at any time, be stopped
and/or resumed by touching the SS |
Stopwatch func tion:
Touch the SS | -button in order to activate the scales. Touch the SS |
second time in order to get to timer mode. Touch the SS |
to activate the stopwatch function. While it is running the stopwatch function can, at any
time, be stopped and/or resumed by touching the SS |
touching the MIN | G/LB and SEC | TARE buttons you can reset the time indicator to
"00:00".
Plea se note: If, within 30 seconds after starting the timer or the stopwatch, no further
activity takes place, the backlight will deactivate but the timer or stopwatch will remain
active.

4. Error messages

Lo = Display battery empty – please replace the batteries with the battery type
intended for your scales (2 x 1.5V AAA).
O-Ld = Overload indicator – max. capacity of scales 5kg has been exceeded.
Remove the load from the scales immediately, otherwise the load cell
could be damaged.

5. Technical Data

Weight-bearing capacity x division:
Dimensions:
Batteries:
We reserve the right to make technical modifications in the course of further development.
-button.
-button a third time in order
-button. By simultaneously
Max. 5 kg x 1 g
220 mm x 165 mm 16.5 mm
2 x 1.5V AAA
3
-button a
-button a