Start-Up - ALFRA TML 500 Bedienungsanleitung

START-UP

You have received a completely assembled lifting magnet and detailed operating manual. Please check the
condition of the goods upon receipt for any damage incurred during transport, and make sure the delivery is
complete. If you have any problems, please contactthe authorized reseller or manufacturerimmediately.
!
Be sure to read the operation instructions completely before using this magnet for the first time!
1. The lever is facing upwards. The lifting magnet is deactivated.
2. Follow the safety instructions. Clean the work piece andthe lower magnetic plate of the lifting magnet.
3. Position the lifting magnet at the center of gravity of the load. The lifting magnet is pre-tensioned slightly
in order to avoid inadvertent slipping and dropping of the magnet (e.g. when used in a vertical or other
forced position).
4. Align the lifting magnet ideally according to the desired application.
5. Press the lever down until it is fully engaged in the ON position. Make sure that the safety tab is securely
locked in place.
6. Move the load hook to the required position and lift the load by about 10 mm to check its deformation
and the magnetic holding force.
7. Now move your load slowly and smoothly. Avoid swinging or jarring.
8. After the load has been set down completely and safely, you can deactivate the lifting magnet. To do
this, press the safety tab using the heel of your hand and move the lever upwards into the OFF position.
16