Contents; Safety Instructions - ALFRA TML 500 Bedienungsanleitung

EN
Dear customer,
Thank you for purchasing an ALFRA product. Please read these operation instructions closely before using
your device for the first time and keep them along with the enclosed Product Control Card for later reference.

SAFETY INSTRUCTIONS

Danger can occur when transporting loads by lifting devices due to improper use and/or poor
maintenance, which may cause severe accidents and serious injury or even death. Read and follow
the operation and safety information contained in this operating manual very carefully. If you have
any questions, contact the manufacturer.
!
Always...
• activatetheliftingmagnetcompletely
• activate the lifting magnet on metallic,
ferromagnetic materials
• use the entire magnetic surface for lifting
• lift on plane surfaces
• check the magnetic holding force by lifting
the load slightly by about 10 cm
• clean the magnetic surface and keep it clear
of dirt, chips, welding spatter
• set the lifting magnet down gently to prevent
damage to the magnetic surface
• check the hazard area before pivoting the load
• respect the stated maximum load before pivoting
• inspect the magnetic surface and the entire
lifting magnet for damage
• use suitable lifting devices
• follow the instructions in the operating manual
• instruct new operators in the safe use of
lifting magnets
• respect local and country-specific guidelines
• keep and use in a dry environment
People using pacemakers or other medical devices should not use this lifting
magnet until they have consulted with their physician.
!
Never...
• lift round or arched objects
• exceed the stated maximum load
• lift loadsoverpeople
• lift more than one work piece at a time
• switch the lifting magnet off before setting
down the load safely
• allow the load to sway or bring to a sharp
and immediate stop
• lift loads exceeding the recommended
dimensions
• lift loads with cavities, cut-out openings
or drilled holes
• liftunbalancedloads
• modify the lifting magnet or remove
operating labels
• use the lifting magnet if damaged or
missing parts
• strain the underside of the magnet through
heavy impact or blows
• position yourself beneath the lifted load
• lift loads while people are within the
hazard area
• leave the lifted load unattended
• use the lifting magnet without having been
properly instructed
• use if you have not read and understood these
operating instructions completely
• use the lifting magnet to support, lift or
transport persons
• operate the lifting magnet in temperatures
higher than 60°C (140°F)
• expose to corrosive substances
13