Windows 2000 - Dicota CardGuard 2.0 Bedienungsanleitung

Step 10: The system shows Windows has finished
installing the software that your new hardware
device requires. Click Next to completely finish the
installation.

• Windows 2000

Step 1: Insert the Driver CD to your CD-ROM and
connect the CardGuard 2.0 to an USB port of your
PC.
Step 2: Click Next to follow the wizard to install the
driver for USB HUB.
Step 3: Select Search for a suitable driver for my
device and click Next to go.
Step 4: Select Specify a location and click Next to
continue.
Step 5: Click Browse to locate the driver shown as
below image and click OK.
5