Dicota CardGuard 2.0 Bedienungsanleitung Seite 4

Step 4: Select Floppy disk drives and click Next to
continue.
Step 5: Click Next to finish the driver installation for
USB HUB.
Step 6: The pop-up window shows This wizard sear-
ches for new drivers. Click Next and follow the
wizard to locate the driver for USB Card Reader.
Step 7: Select Search for the best driver for your
device, and click Next to continue.
Step 8: Select Specify a location, click Browse to
locate the driver shown as the below image, and click
Next to continue.
Step 9: Click Next to install.
4